A first on the market: one SKU pairing a 1000W top light with two 120W under-canopy bars, delivering 3,596 µmol/s at 2.9 µmol/J with red, blue, UV and IR. Patent-pending, ready for beginners, research rooms and small grows, and packaged for e-commerce sellers who want a listing nobody else has.
The highest-yield rooms we supply run two layers of light. This set puts that configuration in one order.
| Why choose the Grow Light Set | |
|---|---|
| 🧩 All-in-one dual layer | One 1000W top light plus two 120W under-canopy lights: the configuration our documented dual-layer project used to reach 1,372 lbs across 6,000 sq ft. |
| 🌱 Under-canopy bars reach the shade | Lower flowers that a top light alone leaves shaded get direct light, and the yield difference shows up in the lower branches first. |
| ⚡ 3,596 µmol/s at 2.9 µmol/J | Total output across both layers, on the same LED and driver platform as the rest of the range. |
| 🎛️ Dimming and daisy-chain control | Both layers run on the same control infrastructure, so one schedule can drive the whole room. |
| 📦 One SKU to order | One part number, one shipment, one spares list: simpler procurement than assembling a dual-layer room from separate catalogues. |
| 📚 Backed by field data | The dual-layer reference project (200 × top light + 600 × under-canopy bars) is documented on our case studies page. |
One spectrum platform across both layers.
Both layers ship a full spectrum with red, blue, UV and IR: the 1000W top light drives the canopy, the 120W under-canopy bars light the lower flowers. Spectrum customisation to your crop protocol is available under OEM/ODM.
We do not publish a generic spectral power distribution curve. Published curves are generic catalogue graphics rather than a measurement of this fixture. A measured spectral report for your configuration is available on request and ships with the order.
Values apply to the complete set (top light plus two under-canopy bars). Efficacy is verified per production batch on our in-house integrating sphere; the test report ships with the order.
| Grow Light Set — technical data | |
|---|---|
| Includes | 1× 1000W top light + 2× 120W under-canopy lights |
| Total power | 1240W |
| Total photon flux (PPF) | 3,596 µmol/s |
| Photon efficacy (PPE) | 2.9 µmol/J |
| Spectrum | Full spectrum with red, blue, UV and IR |
| Function | Dimming · Daisy Chained |
| Voltage | AC 100–277V; 347V–480V optional |
| LEDs | Samsung / Osram / Epistar / SMD |
| Driver | CE / UL Driver |
| Lifespan | >50,000 hours |
| Warranty | 3–5 years (optional, model-dependent) |
| Certifications | ETL · DLC · CE · RoHS — see full certificate list |
| Customisation | Spectrum, PPFD, logo, LED brand, housing colour, driver, style, design — OEM / ODM details |
Voltage, warranty term and certification scope are confirmed per order configuration. Nothing on this page is a final offer: send your room details for a configured quotation.
| Where the Grow Light Set fits | |
|---|---|
| 🌿 Dense-canopy flower rooms | Top light drives the canopy while under-canopy bars reach the lower flowers that would otherwise be shaded. |
| 📚 Dual-layer conversions | A documented path to the configuration behind our 1,372 lbs dual-layer reference project. |
| 📦 One-SKU procurement | Purchasing one set instead of two product lines: one order, one shipment, one spares list. |
| 🔁 Standardised multi-room fits | Every room gets the same proven dual-layer recipe, from install through spares. |
| 🌱 Full-cycle facilities | Dim the top layer for veg cycles and run both layers full for flower. |
At full output on a 12/12 flowering photoperiod, the complete 1240W set draws about 14.9 kWh per day. Dimming brings that down further, and the exact draw of your configuration is confirmed in the test report that ships with each order.
Send your room size and target PPFD, we reply with a fixture count, a layout and a configured quotation.
We do not publish a generic PPFD table, because the same fixture reads very differently at 12 in and at 36 in, over reflective walls or open aisles. Instead, send your room and we return a layout.
Canopy footprint, ceiling height, aisle width, and whether the space is sealed or ventilated.
If you run single-layer lighting today, send the fixture count and wattage: we map the dual-layer upgrade and the expected lower-canopy gain.
You get a fixture count, wattage per fixture, bar configuration, and estimated canopy-level PPFD with stated assumptions.
Configured pricing, warranty term, and lead time for your quantity.
One 1000W top light and two 120W under-canopy lights, 1240W total, delivering 3,596 µmol/s at 2.9 µmol/J. One part number covers the complete dual-layer room.
A top light alone shades the lower flowers: the canopy intercepts most photons before they reach the lower branches. Under-canopy bars light that layer directly. In our documented dual-layer project, 200 × 1000W top lights plus 600 × 120W bars produced 1,372 lbs across 6,000 sq ft.
Both layers run dimming and daisy-chain control on the same platform. The exact channel configuration for independent layer control is confirmed per order: tell us how you want to run the room and we configure accordingly.
Yes. OEM/ODM covers spectrum, PPFD target, logo, LED brand, housing colour, driver, style and design, plus optional smart controllers and apps. Samples are typically ready in 1–5 days and mass production runs 15–35 days depending on volume.
3–5 years optional, model-dependent, covering the fixture and driver. Terms are stated on the quotation so there is no ambiguity at delivery.
Dimensions, ceiling height, and your current lighting if you have it. We reply with a layout, a PPFD estimate and a configured quotation.
